Distributed assets.
Managed centrally.
Pumping stations, reservoirs, wells, substations and generation plants: Maintenir brings together maintenance, inspections, faults and sensor data for your entire infrastructure, with the security architecture critical infrastructure needs.
Supply has to run. Around the clock.
Many sites, few people
Assets are spread across the whole network area. Skilled staff are scarce and distances are long.
Faults outside working hours
At night and at weekends, the on-call team needs all the information on the asset straight away.
Regulations and records
Technical rules for water, drinking water regulations, electrical standards: maintenance and inspections must be fully documented.
IT security
Critical infrastructure can’t afford software that can control assets remotely or sends data abroad.
From well to substation in one system
Map your entire network area, with every station, asset and component. Every asset has its digital record with history, documents and inspection plan.
Every measure planned. Every record available.
Maintenir schedules maintenance and recurring inspections automatically, sends timely reminders and documents every result with photo and signature.
Maintenir does not replace expert inspections. You set intervals and scope once according to regulations, local rules and your risk assessment, and the system plans the rest.
Fewer trips. Faster fault clearance. Clean records.
Pressure, level, flow: monitored around the clock.
Sensors report readings from your stations to Maintenir. If a limit is exceeded, an alarm goes off immediately and a work order is created. Trips just to check are no longer needed.
- Limit alarms via app and email
- Complete recording of readings
- Predictive maintenance instead of breakdowns
Alarm at two in the morning? The on-call team knows straight away.
Every alarm and every report becomes a complete work order with station, asset, history and documents. The on-call team has everything on their smartphone before they set off.
- Work order straight to the responsible on-call team
- Circuit diagrams, manuals and history with a scan
- Status visible to control room and management
Network area, station, asset, component.
Map your infrastructure the way you operate it. Every pump, valve and switchgear is uniquely identifiable by its label.
- Water, power, gas and heat in one system
- Rights per utility, network area and team
- Connection to your ERP
Work and document right at the station.
Checklists guide through maintenance and inspection, findings are recorded with photo and signature. Your fitters book their time directly to the work order, even offline in a shaft.
- Checklists for pumps, valves and stations
- Photos and signature right in the app
- iOS and Android
- Asset identified by scan
- Circuit diagram and history opened
- Safety instructions confirmed
- Checklist completed 8/8
- Spare part requested → to purchasing
- Sign-off with signature
New to the team? Ready after the first scan.
Skilled workers are scarce, experienced colleagues are retiring and more and more work is done by contractors. Maintenir gives everyone the information they need in the simplest way: with a scan, right at the asset. Defined process chains are followed, all the way to purchasing.
- Asset knowledge stays in the system, not just in people’s heads
- Checklists guide step by step through the job
- Fixed workflows through to the material request in purchasing
Contractors in the same system.
Assign assets to a maintenance contract. Maintenir schedules the appointments, and your service providers document directly in the system. You can always see what has been done.
- Due maintenance per contract and station
- External providers work directly in the system
- Proof of service as the basis for invoice checks
Reads along. Never controls.
For utilities, what counts is not only what software can do, but also what it can’t.
Read-only IoT hardware
Our own circuit boards, developed in Germany, can only read values. The hardware has no return channel into your controls or control system.
Private mobile network
Sensors transmit via Telekom M2M SIM cards with a private APN, separate from the public internet and from your company network.
Servers in Germany & Europe
Operated in the Telekom Public Cloud, in data centres with ISO 27001 and BSI C5.
Rights and roles
Employees and service providers only see the stations and assets released to them.
Geo-redundant backups
Your data is backed up at geographically separate locations.
CVE monitoring, no AI in production
Known vulnerabilities are continuously monitored and fixed. No AI processes run in production, the only exception being an AI chat that can be switched off.
Start with one pumping station.
Start small and grow: in 30 minutes we’ll show you how Maintenir brings maintenance, inspections and faults across your infrastructure together.
Request Demo
Learn in 30 minutes how Maintenir works for your company.
Alexander Klimitz / Head of Sales
